Acanthus Closed Tip, 2 Left-Hand (LH) and 2 Right-Hand (RH) pieces, 5"w x 2 1/8"h x 3/4"d Carved Onlays White River Hardwoods 5"w x 2 1/8"h x 3/4"d Beech

Acanthus Closed Tip, 2 Left-Hand (LH) and 2 Right-Hand (RH) pieces, 5"w x 2 1/8"h x 3/4"d

5"w x 2 1/8"h x 3/4"d / Beech
$163.53
Sale price  $163.53 Regular price  $233.62
Skip to product information
Acanthus Closed Tip, 2 Left-Hand (LH) and 2 Right-Hand (RH) pieces, 5"w x 2 1/8"h x 3/4"d Carved Onlays White River Hardwoods 5"w x 2 1/8"h x 3/4"d Beech

Acanthus Closed Tip, 2 Left-Hand (LH) and 2 Right-Hand (RH) pieces, 5"w x 2 1/8"h x 3/4"d

$163.53
Sale price  $163.53 Regular price  $233.62
Size5"w x 2 1/8"h x 3/4"d
Wood SpeciesBeech

White River Hardwoods · European Carvings

Acanthus Closed Tip Onlay

SKU TIP308 · 5″ w × 2-1/8″ h × 3/4″ d

Solid Beech

Acanthus Closed Tip onlay in 5″ w × 2-1/8″ h × 3/4″ d, hand-carved in solid European beech. Sized for cabinet doors, furniture, mantels, and panel centers.

Free Shipping · Unfinished · Stain or Paint

Ornament is what turns a box into furniture and a wall into architecture. This is the piece that does it.

European Carving

Hand-carved in solid beech in Europe and stocked for immediate shipment. European Carvings are priced net.

Dimensions

SKU Material Dimensions
TIP308-3-Beech Beech 5″ w × 2-1/8″ h × 3/4″ d

Ships unfinished; stain or paint on site. Free shipping.

The Carving in Detail

Hand-Carved Beech

Carved in solid European beech — tight, even grain that holds fine detail and takes stain or paint evenly.

Left & Right Pairs

Mirrored pairs where the design calls for it, so a symmetrical layout reads correctly from the center out.

Installs with Glue & Pins

Wood glue and brads. Fill, sand, finish.

Net Priced

European Carvings are priced net; the price shown is the price for every customer.

Key Facts

SKU

TIP308

Type

Onlay

Width

5″

Height

2-1/8″

Depth

3/4″

Material

Solid Beech

Shipping

Free

Step by Step

1

Test-Fit Dry

Hold the piece in place and mark its outline. Check it against adjacent ornament for alignment.

2

Prep Both Surfaces

Sand the mounting surface lightly and wipe the back of the carving. Clean wood glues; dusty wood doesn't.

3

Glue & Pin

Wood glue (or construction adhesive for resin and compo) on the back, press into position, and pin with 18- or 23-gauge brads at low points in the relief.

4

Fill & Finish

Fill pin holes with matching filler, sand flush, and stain or paint with the surrounding work. For stain, sample on the back first — species and carved grain take color differently.

Care & Handling

Unfinished wood should be finished soon after installation. Dust carved relief with a soft brush; avoid soaking. Interior use unless otherwise noted.

TIP308 — Acanthus Closed Tip Onlay. European Carvings from White River Hardwoods.

You may also like